Our 11 Step Cleaning Process For Upholstery
Our 11 Step Cleaning Process For Upholstery
Pre-inspection
Our service technician will inspect the furniture, noting fabric type and soiling conditions. He will also advise you of any possible permanent staining.
Pre-vacuum
Your upholstery will be vacuumed if needed.
Floor Protection
If needed, your hard surface floors will be protected with an absorbent material to ensure we do not drip or over spray as we clean the upholstery.
Pre-spray & Pre-Spot
The fabric is “pre-sprayed” with special cleaning compounds specially designed for your particular fabric& soil condition. This loosens up the soil to make rinsing more effective.
Pre-Agitate
If needed for heavily soiled arms and cushions, the pre-spray will be worked into the fabric with a horsehair brush, specially designed for this use.
Rinse & Extract
Once the soil has been loosened, we will thoroughly flush the fabric with our specially designed upholstery extraction tools. This step removes soil from the fabric and leaves your fabric soft and residue free.
Post Spot Treatment
If any spots are not removed during the cleaning process, specialty-spotting techniques are employed.
Speed Dry
High velocity air movers are set in place to speed dry the upholstery.
Fabric Protector
Apply a solvent based protector to repell oily soils and drink spills.
Post Grooming
If the fabric has a knap, the knap is set in one direction using a grooming brush.
Post Inspection
Piece is inspected by technician & then by you the homeowner during our post inspection. Let us know that you are pleased by signing our service receipt.